Lasko HF25630 Manuel d'utilisation et d'entretien Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
HF25630ES
New 4/14
3
HF25630ES
New 4/14
14
OPERACION
Uso del Purificador de Aire Pure Platinum
Este Purificador está diseñado para limpiar de manera eficaz salas de tamaño pequeño a grande en
su hogar. Para obtener el máximo rendimiento, asegúrese de cerrar las puertas y las ventanas de la
habitación que está purificando. Para el uso diario, se recomienda hacer funcionar el Purificador en
modo Automático para purificar el aire según sea necesario. A medida que cambie la calidad del aire,
el Purificador seleccionará la potencia de limpieza adecuada. Puede tomar hasta 60 segundos para
que el sensor detecte la calidad del aire. Durante ese tiempo, la pantalla de Calidad del Aire destellará
(detección), luego cambiará a Verde (limpio), Amarillo (moderadamente sucio), o Rojo (sucio).
1. Enchufe la unidad en una fuente de alimentación operativa de 120V.
2. El funcionamiento intuitivo hace que este dispositivo sea muy fácil de usar. Toque ligeramente
cualquier función para seleccionarla.
Alimentación Presione el botón para encender (ON) y apagar (OFF) el Purificador de Aire. Tenga
en cuenta que el aire purificado saldrá del lado derecho inferior de la unidad.
Velocidad del ventilador: Pulse el botón para desplazarse por las velocidades de Automático,
Baja, Media y Alta en secuencia.
Automático: El Sensor de Calidad del Aire elegirá automáticamente la potencia de limpie-
za adecuada dependiendo de las condiciones. PUEDE TOMAR HASTA 60 SEGUNDOS PARA
QUE EL PURIFICADOR ENTRE EN EL MODO AUTOMÁTICO. Durante este tiempo, el indicador
LED frontal se iluminará para mostrar la calidad del aire actual.
Parpadeo = Evaluando el aire Rojo = Deficiente
Amarillo = Moderado Verde = Bueno
Temporizador de apagado automático: Esta función apagará automáticamente el Purificador
después de un cierto período. Para activarla, pulse el botón hasta que se iluminen los intervalos
de horas deseados. El Temporizador es acumulativo, de hasta 7 horas. Para interrumpir, pulse el
botón hasta que todos los LED debajo de las marcas de las horas estén apagados.
UV - Ion: Pulse el botón para activar el Protector UV-un contra gérmenes y el Generador de
iones negativos. Siempre asegúrese de que el Filtro TiO2 está instalado para lograr la máxima
eficacia. Las funciones operan de manera independiente o en conjunto.
Modo de reposo: Este modo puede utilizarse cuando desea una operación discreta. Cuando
se presiona, el Purificador permanecerá en Velocidad Baja y los LED se atenuarán a un 50% de
brillo. Para detener la operación, pulse el botón de Modo de reposo (Sleep) de nuevo.
Bloqueo para niños: Esta función evitará las entradas del usuario no intencionales. Antes del blo-
queo, asegúrese de haber seleccionado todas las configuraciones deseadas. Para bloquear, pulse
y mantenga presionado el botón durante 5 segundos hasta oír un pitido y el LED debajo del botón
se ilumine. Al presionar el botón de Encendido se apagará la unidad, incluso si el Modo de blo-
queo para niños está activo. Para desbloquear, mantenga pulsado el botón durante 5 segundos.
Recordatorios para el reemplazo del filtro: Cada filtro tiene su propia luz
recordatoria de reemplazo. Cuando el LED debajo del filtro correspondiente
se ilumine, reemplácelo por un Filtro Lasko Pure Platinum genuino.
READ AND SAVE THESE INSTRUCTIONS
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS PRODUCT WITH ANY SOLID STATE SPEED CONTROL DEVICES.
Failure to the following warnings may result in electrical shock, burns, fire or injury:
WARNING
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Product.
The Blue Plug™ on your Lasko purifier is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered with. To
reduce the risk of fire, electric shock and personal injury, DO NOT attempt to remove, replace, repair or tamper with the originally supplied plug. If the Purifier
has stopped functioning, it may be due to the safety device incorporated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m.
Eastern for questions. If the plug warning label is missing or damaged, call the toll free number for a replacement label.
THIS PURIFIER HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade
to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified
electrician. The outlet may need to be replaced.
1. Make certain the power source conforms to the electrical requirements of the Product.
2. Make certain that the room is equipped with a working smoke detector.
3. Use this Product only as described in this manual. Any other use not recommended by the manufacturer may result in injury to persons or damage to property.
4. To reduce the risk of personal injury and electric shock, the Product should not be played with or placed where small children can reach it.
5. Unplug power cord before moving the Product.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN MOVING THE PRODUCT. ALWAYS UNPLUG THE POWER
CORD. ALWAYS TURN OFF THE PRODUCT BEFORE LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE PRODUCT IS ON OR PLUGGED IN.
6. DO NOT use Product in or near a window. Rain may create an electrical hazard.
7. Completely assemble Product according to instructions before connecting to power supply.
8. Avoid the use of extension cords because the extension cord may overheat and cause a fire. Do not plug Product into any other cord connected device,
such as a power strip, cord reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.
9. NEVER operate any Product with a damaged cord or plug, or if the Product has been dropped or damaged in any manner.
10. NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the Product.
To reduce the risk of fire, DO NOT block or tamper with the Product in any manner while it is in operation.
11. Always place the Product on a stable, flat, level surface when operating to avoid the chance of the Product overturning. It is recommended for floor use
only. Locate the Power Cord so the Product or other objects are not resting on it. Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.
12. This Product is not intended for use in wet or damp locations. Never locate a Product where it may fall into a bathtub or other water container. NEVER use
Product where flammable liquids are used or stored.
13. Care should be taken so that objects do not fall and liquids are not spilled into the enclosures.
14. NEVER use Product outdoors
15. This product contains UV LEDs. Always operate with TiO2 and HEPA-Type filters installed.
16. This Product is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National
Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS
PRODUCT DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
17. This Product is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or
standards relating to electrical requirements for Hazardous locations. THIS PRODUCT DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).
WARNING
Do not immerse entire air purifier unit in water or other liquid.
Do not reach for air purifier unit that has fallen into water. Unplug it immediately.
The unit should be situated away from heat sources such as direct sunlight, radiators, heat registers, stoves or other heat-producing appliances.
Never block the air openings of the unit with materials, such as clothing, plastic bags or papers. Do not place it on a soft surface, such as a bed or sofa
where the air openings may be blocked. Keep the air openings free of lint and hair.
Do not carry this unit by its cord or use the cord as a handle.
DANGER
DO NOT disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when the unit is used. There are no
user serviceable parts inside. “Dangerous voltage” within the unit’s enclosure may be of sufficient magnitude to constitute a risk of electric shock.
DO NOT expose this unit to wet, damp, rain or moisture locations.
This Product must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres where gasoline,
paint, flammable liquids or vapors are used or stored.
DO NOT operate where aerosol units are being used or where oxygen is being administered. Do not operate this unit in oxygen rich environments.
CAUTION
Remove all packing materials (bags, cardboard, foam, etc.) prior to operating this unit.
Do not allow children to play with any plastic bags that accompany this unit. Plastic bags are a hazard to young children.
Close supervision is necessary when this unit is operated near children.
Do not allow children to play with this unit. This unit is not a toy.
Use this unit only for its intended use as described in this manual.
Unplug this unit during lightning storms or when unused for long periods of time.
For indoor use or operation only.
Use correct electrical supply voltage as indicated on the bottom label of the unit.
Turn the unit off before unplugging from an electrical outlet.
Plastic or rubber parts, like the feet on this product may stick to surfaces and/or hardwood floors. The product may leave a residue that could darken, stain
or leave permanent blemishes on the finish of certain surfaces.
FCC INFORMATION
This unit complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Vue de la page 2
1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire